Ref. PF 1022

This is a profile system for installing stone with concealed stainless steel anchors and pin fixing. The anchors can be placed in either horizontal or vertical joints as desired.

The system consists of vertical aluminum C-profiles (EN AW 6063 T6) anchored to the supporting wall using brackets, and discontinuous stainless steel anchors (AISI 304/316) that support the stone and are, in turn, anchored to the vertical profiles using a screw and threaded trapezoid system.

The minimum joint produced by the anchor is 5 mm, with the recommended joint being 6 mm. The minimum recommended joint without anchors is 3 mm.

This system can be used in combination with the continuous and discontinuous PF 1025 systems for special lintel solutions.

Contact our Technical Department and we will advise you on the most suitable profile system for your needs.