Ref. PF 1020

This is a profiling system for stone installation with exposed stainless steel anchors. It is specifically designed for installing unrectified slate, but can be used for any type of natural or artificial stone 2 to 3 cm thick. The anchors can be lacquered in a color from the RAL Classic chart or left with a visible stainless steel finish.

A springless version is also available for installation with concealed anchors.

The system consists of vertical aluminum C-profiles (EN AW 6063 T6) that are anchored to the supporting wall using brackets, and discontinuous stainless steel anchors (AISI 304/316) that support the stone and are in turn anchored to the vertical profiles.

The minimum horizontal joint allowed by the system is 3 mm, although the recommended joint is 4-5 mm. The minimum recommended vertical joint is 3 mm.

Contact our Technical Department and we will advise you on choosing the profiling system most suitable for your needs.